For work, you need 1 skein of white Baby threads from Jan Art and half a skein of red ones. We start work from the bottom of the cap))) I knitted 48 cm on a tadpole, but she sat down freely, you can safely knit 50!
Recruiting 112 air. loops, we close them in a ring, we begin to knit in a circle. We knit 6 rows of facial embossed and purl embossed CH, alternating 2 and 2.


Then I break the thread and start knitting from the side of the air loops, so the edge of the cap will turn out to be more embossed!

The principle of alternating stripes: 4 red rows of CH and 6 white.
1 strip (red): we knit with the usual CH 4 rows, but in the 1st row we knit 2 CHs together 4 times.
2 stripe (white): 6 rows of CH. In the 2nd row, each 17 and 18 CHs are knitted together. In the 3rd row - 12 and 13 CH knit together. In the 4th row, 9 and 10 CH knit together. In the 5th row, 9 and 10 CH knit together. Dec 10 dc evenly in row 6.
3rd stripe (red): In the 1st row we evenly decrease 7 CH, in the 2nd - 6 CH, in the 3rd and 4th rows - 5 CH.
4th stripe (white): in the 1st-3rd rows we evenly decrease 2 CH, in the 4th row - 1 CH, we knit the 5th and 6th rows without reductions.
5th stripe (red): in the 1st row we decrease 1 CH, and we knit rows 2-4 without reductions.
6 stripe (white): in the 2nd row we decrease 1 CH, and we knit rows 1 and 3-6 without reductions.
7th lane (red): in the 1st we decrease 1 NS, and 2-4 rows without decreases.
8th stripe (white): in the 1st and 5th rows we decrease 1 SN each, and the 2nd-4th and 6th rows without reductions.
9th stripe (red): 1 CH decrease in the 3rd row.
10th stripe (white): 1 CH each in the 2nd and 5th rows.
11th stripe (red): 1 Sn decrease in the 2nd and 4th rows.
12th stripe (white): 1 CH is reduced in the 2nd, 4th, 5th, 6th rows.
13 stripe (red): in all 4 rows we subtract 1 CH.
14 stripe (white): in rows 1 to 4 we decrease 1 CH each, and in 5 and 6 we knit all CH 2 together! ALL)

Here is an interesting way to make a pompom: http://www.stranamam.ru/post/4051010/.

And here is the result of our work!

Hi all! We knit a cap. Yarnart Baby yarn, hook No. 3.0. We collect a chain equal to the girth of the head and a multiple of 10 or 12 (the number of loops should be divisible by these numbers), I have 48. We knit an elastic band, knitting or crocheting. If crocheted, then 1 row CCH, 2 row embossed CCH - alternation of front and back.

My thread is thick, so I knitted only a row of embossed columns. Who will have a thin focus on the model. Fold the strip in half and sew
The third row I knitted st b / n
Alternating threads knitted 2 rows of CCH-48 double crochets (CCH)
On the 5th row, start decreasing. Start decreasing when the knitting height reaches the crown. If you knit for an adult, let's say 120 loops: 12 \u003d 10, then every tenth loop must be closed. We have a doll, the size is small, I started to close every 12 loops in the 5th row (we knit 10 CCHs, and we knit 11 and 12 CCHs together).
And she closed the loops in each row, every 11, 10, 9, 8, 7, 6. Then she knitted 2 rows without decreasing. The next row closed every 5 loops, 2 rows without decreasing. Then every 4 loops (2 CCHs were knitted, 3 and 4 CCHs together). And they pulled all the loops together, closing the knitting. When you knit, be guided by your doll, and how long you want to make a cap. It is NOT necessary to make decreases in each row. If you want a hat with a long tail, then decrease through an equal number of rows. Decreased, knitted 2-3 rows, diminished again, etc.


The wrong side of the product - the thread did not tear off, but simply raised it to the next row. Also, in knitting a straight fabric, it is not necessary to break the thread, you just lift it along the side and insert it into knitting again. Important When knitting in a circle, the lifting loops tend to move diagonally, so that this does not happen, it is necessary to knit not in circular rows, but straight and back. We knit a row, close it and turn the work, knit a row in the opposite direction. In this case, there will be no shift.

You have probably seen that a hat-cap is popular in children's professional photo shoots; it will be quite easy to knit such an accessory with knitting needles, having basic knitting skills. But such a hat can be made not only for children. The adult model turns out to be youthful, catchy and comfortable. She adds a bit of playfulness and positive to the image. Adults, after all, are also sometimes not averse to fooling around. You can also create a fun New Year's family bow by knitting a holiday hat in the style of Santa's helpers.

We knit a children's hat-cap with knitting needles in a step-by-step master class

The cap cap is also called "Pinocchio". You probably remember from Soviet cartoons and illustrations that Pinocchio was depicted with a long nose in a striped mischievous cap with a pompom. Is this one of the popular cap cap variations? striped long hat with a fluffy pompom at the end.

Such a model? favorite of newborn photographers. Now it is important to shoot the baby in a gentle way during the first weeks from birth. Specially trained photographers are engaged in such photo shoots, and this type of photography is in great demand. Masters in this business have to use their imagination and try hard to come up with an original image of a baby for photography. If you have a share of creativity, and you also want to organize a similar photo session for a child, then knit such a hat. It is guaranteed to decorate the photo and help keep fond memories.

For everyday use, this headpiece is also perfect. Therefore, is it worth making it yourself so that the cap meets all your expectations? was warm, beautiful and original.

This master class describes the process of creating a cap hat for a one-year-old child, that is, it will fit a head circumference of 43-48 cm. For this you will need:

• 2 skeins of acrylic yarn 150 m per 50 g;
• stocking knitting needles No. 2.5;
• thick cardboard, compasses, pencil and scissors.

Let's start the knitting process:

1. With a blue thread we collect 108 loops, then they need to be distributed on 4 knitting needles, 27 loops for each.
2. The next 14 rows we perform the cuffs of the cap, for this we will use the pattern "gum 1x1".
3. The rest of the fabric is knitted in plain stockinette stitch. You should not cut a light blue skein, you just need to attach a white thread. We knit 6 rows with a white thread, and perform the next 4 rows with a blue thread. This alternation of rows on the stripes must be carried out throughout the entire knitting process of the cap, so that symmetrical stripes are obtained as a result. We knit with a straight cloth to a cap height of 16 cm.
4. You can form the "tail" of the cap in the following way: on the right and on the left in each 4th row we make reductions of 2 loops. The main thing is to make them symmetrical on the sides of the cap. So we knit 3 loops at once. When the work reaches a height of 30-32 cm, can you make reductions less often? in every 8th row.
5. In this way we knit 10 cm, now the reductions must be made in every 10th row. If you have the last two dozen loops left on the knitting needles, then pull them onto a thread.
6. Let's start making a pom-pom. For this purpose, you can take a special device. If you do not have this tool, do not worry, we use improvised means. We draw a large circle on cardboard with a compass, with an approximate diameter of 15 cm. In the middle we make a small circle with a diameter of 4 cm. Cut out the blank, making a hole inside it. There should be two such cardboard disks. We put them one on top of the other, between them we stretch a piece of thread. Carefully cut the yarn with scissors along the outer edge of the discs. We drag them with the thread that was between the cardboard circles, tie them tightly. We straighten the pompom, tie it to the tip of the cap. We fix all the ends of the threads on the wrong side of the product.

After all the steps, it remains to sew the canvas. For the final part of the work, you can take a hook. We connect the edges of the cap with a hook using a connecting post. That's all, the hat is ready!

We analyze the detailed creation of a female model with knitting needles

The hat cap sits perfectly on the fair sex. Fluffy yarn of a monotone color is best suited for this model. Then you should get a very original wardrobe detail!

To create a cap hat for women, take:

• 100 gr. acrylic white yarn 400 m per 100 gr.;
• knitting needles No. 3.5.

Using these materials, you should get a medium-sized hat with a head circumference of 56 cm. When folded, the dimensions of the headdress will be: 25 cm wide and 48 cm long.

Scheme of the patterns used: "Tangled", knit 1 front loop with 1 wrong side alternately, and the pattern is shifted in each row by 1 loop. Facial knitting: where the front rows need to be knitted with facial loops, purl loops - purl rows.

Let's start creating a female headdress with knitting needles:

1. We collect 75 loops and knit 11 centimeters with the “Putanka” pattern.

We knit the next 14 cm with an ordinary facial surface.

1. We make decreases at the beginning and end of each sixth row, 1 loop.
2. After 48 cm after the beginning of the cap, we close the loops.
3. We tighten the last loops and sew a seam in any convenient way. Also make a large and fluffy pompom, sew it on the top of the hat.

Video tutorials for beginners on the topic of the article

How to knit a hat-cap with knitting needles, you will also learn from the videos collected below. Good luck in creativity!

The most long-awaited night of the year is coming soon! It's time to start thinking about outfits. And even if it will be an evening dress or suit, then you should not neglect the integral attribute of this holiday - Santa's hat!

In this tutorial we will tie New Year's hat Santa Claus with a beard.

For knitting we need:

• Yarn;
• Hook.

You can take the yarn either red or blue. But since the element of fire will patronize this year, we will take red yarn.

Let's knit first rubber band for hat. To do this, we collect an air chain from the required number of loops. It depends on the circumference of the head.

It is better if their number is divisible by 6. So it will be easier to subtract. Therefore, when we measured the girth, we add the missing number of loops.

So, we scored an air chain and we knit 1 row of CCH. Do not forget at the very beginning of the row to make 3 loops for lifting, which will replace the first CCH.

We connect in the 3rd lifting loop of this row.

Now we will knit convex and concave columns. At the beginning of the row we make 3 lifting loops. And we knit 1 convex column, then 1 concave column in the next column of the previous row.

So we will alternate to the end of the entire row.

The next 8-9 rows will be exactly the same.

You can knit not 9 rows, but 18 or 20, and then tuck the elastic. The hat will turn out with a lapel.

We knit 12 rows of RLS.

Now we count the total number of loops and divide by 6. For example, if there are 72 of them, then dividing by 6, we get 12. This means that in the new row we will knit 11 RLS, and knit 12 and 13 loops together.

1 row without reductions.

Row with a decrease through 9 loops, that is, in a 10 loop.

1 row without reductions.

So we knit until only 18 loops remain.

Then we decrease in every 3rd loop of the row.

We get 12 loops and knit 1 row without reductions.

We decrease through 1 loop. We get 6 loops.

1 row without reductions.

Dec in each stitch until close.

We make a small pom-pom from white yarn.

Now we form a beard.

We take a white thread and collect 20 loops.

We knit 2 sc in each of these loops.

At the end, cast on 20 stitches again and repeat.

So we knit the required number of spirals.

Attach the beard to the hat. Santa's hat with a beard is ready!

Quite relevant is always (and even more so with the onset of cold weather) such an accessory as a hat remains. In addition to having a warming effect, it should match the chosen style: everyone wants to look fashionable. Therefore, any fashionista tries to choose both a style and a model that would suit only her. A cap-cap is a headdress that suits both respectable adults and unintelligent kids. And to whom it suits more, it still needs to be figured out.

We are preparing seriously

From the very beginning, the cap-cap was intended for young men and boys. But it just so happened that the girls adapted this headdress for themselves. For many seasons, such hats have remained popular for both sexes.

Even beginners can knit this headdress. If they know how to first dial a few loops, and then knit them with facial or purl, then it is quite possible to start work. for beginner craftswomen will not be a problem. In just a couple of evenings, a cute hand-made hat will be ready.

If an English gum is chosen, then the number of loops must be a multiple of two. In the first row, you just need to alternate front and back loops. In the second, knit a little differently: first - the front one, then yarn over, remove the wrong side without knitting. Knit the third row like this: knit the front loop and yarn over from the previous row together with the front one, then yarn over, and remove the wrong one again.

If a cap-cap is supposed to be knitted for a girl, it should be fun, so, as a rule, different colors of yarn are chosen. You can even make it striped by connecting two or three balls of thread that match in color or tone.

Choose a pattern

It is preferable to knit a hat-cap with simple patterns - a simple or English elastic band, front or wrong side. If it is decided that the thing will be striped, then the very combination of a couple of colors will give originality, so the simplest pattern will be needed.

If the hat-cap, the diagram of which will be given below, is knitted with an elastic band, then it will comfortably fit the head due to its elasticity.

To make the hat very fashionable and exclusive, you need to use thick knitting needles. Thanks to them, you can not come up with some kind of complex pattern, because in this case, even the simplest knitting will look great. For those ladies who want to quickly cope with the task and quickly finish their work, they must remember that it is with thick knitting needles that this will be as close as possible.

Knitted will also look pretty, but this work will take a little longer than knitting. And the principle of operation is the same as in the first case. In the figure you can see the schemes that will be needed for work.

How to get started right?

When the model and color of the yarn is already determined, you can start knitting. As a rule, the first step is to knit a sample and calculate the proportions. It is necessary to calculate how many loops are obtained in the finished sample, measure its size. The volume of his head is known. Now you can calculate the number of loops needed for the hat, given the number needed to repeat the pattern (when needed).

So, in our plans - connected. How to do it? You can choose one of two options: work either on two knitting needles or on circular ones. The latter method is more convenient, because in this case it will not be necessary to make a seam at the back of the product. If there is no habit of working with circular needles, you can knit using five ordinary straight lines.

If such a solution to the question is chosen, then the entire number of loops must be divided into 4 knitting needles equally. If the pattern is not elastic, then at first it is necessary to tie at least two or three centimeters with an elastic band, so that later the finished product does not hang on the head, gradually stretching.

And now you can knit a hat with the main pattern. Its length can be about a quarter of a meter. But if you really want a longer hat, then you need to knit about 35 cm straight, and then make reductions. It is quite easy to do them: knit two loops together. Reductions should be distributed moderately. When only four loops remain on the knitting needles, it is necessary to stretch the thread through them and tighten it, then carefully hide it inside the cap.

Cap with pompom. Choice of pattern and yarn

A plain knit cap hat is a great choice for any girl trying to look fashionable. Color does not matter here, the main thing is that the lady herself likes it.

For example, let's take 56. When folded, the width will be 28 cm and the length - 48 cm. It is best to use acrylic yarn - 100 g with a length of 400 meters - and knitting needles No. 3.5.

The chosen pattern will be a “confusion”: the front and back loops are alternately knitted, and then the pattern is shifted in all subsequent rows by just one loop.

Facial knitting will consist of regular facial rows. Therefore, there will be purl loops from the inside.

Cap with pompom. Description of work

You need to dial 75 loops on the knitting needles and knit the “tangle” pattern for eleven centimeters. Then knit fourteen centimeters of fabric with facial viscous. But now you can gradually reduce the loops at the beginning and end of each sixth row - one piece at a time.

Having knitted a total of 48 cm from the beginning of work, you can begin to decrease the loops. At the very end, pull off the few remaining loops and sew neatly. If you want the cap to look more elegant, you can make a decorative pom-pom yourself and attach it to the top of the cap.

And the kids too

Children's photographers love to capture the little ones in these hats. They are suitable not only for photo shoots, but also for every day. How to knit such a hat for a one-year-old baby, whose head circumference is approximately 43-48 cm? This will require two skeins of acrylic yarn (150 m per 50 g), knitting needles No. 2.5.

With a blue thread, you need to dial 108 loops, which are then distributed over 4 knitting needles: 27 loops for each. Using a 1 x 1 elastic band, knit fourteen rows. Next, you need to knit with the front surface. Now attach a white thread and knit 6 rows with it, then 4 rows - blue. Throughout the work, it is necessary to alternate the colored stripes in order to obtain symmetrical stripes. Knit until the cap is sixteen centimeters high.

The “tail” of the cap can be done like this: both on the left and on the right in every fourth row, make a decrease in two loops. Here it is important to make them neat and symmetrical with respect to the sides of the cap.

When the canvas is knitted to the level of 30-32 cm, reductions can be made a little less often - in every eighth row. So knit ten centimeters. Decrease to do now in every tenth row. When a couple of dozen loops remain on the knitting needles, you need to pull it off with a thread. Sew on a pom-pom if desired.